Fluid management
Most hydraulic failures start in the oil, not in the components.
Worn pumps, sticking valves, scored cylinders — in most cases the root cause is particles, water or degraded oil. Replacing the failed part without treating the oil merely postpones the next failure.
We sample, analyse, filter and monitor oil quality on a cycle, so you know the state of the system before it shows up as a breakdown.
What it covers
Oil analysis
Regular sampling with cleanliness, water content and viscosity measured; report with recommendations.
Oil filtering and cleaning
Offline filtering to bring cleanliness back within limits without a full oil change.
Flushing for new systems
Flushing before commissioning to remove welding scale and machining debris from the pipework.
What you get
Longer pump and valve life
Holding cleanliness within the manufacturer limits is the cheapest way to protect expensive parts.
Early failure detection
Metal particles appear in the oil before the pump makes a noise.
Less waste oil
Filtering instead of full replacement cuts both cost and the volume to dispose of.
A basis for planning
A series of analysis results shows which shutdown to plan the work into.
Need advice for your system?
The HANSA-FLEX Vietnam engineering team is ready to survey your site and propose a suitable solution.